4pcs Hard Thermoplastic Feet 10mmX20mm FF-004B
Uses a hard nylon screw to spread the holder inside of the case to attach.
Press screw to install, release with screwdriver.
Each foot is 25/32 (20mm) diameter and 25/64" (10mm) height.
Fits a hole diameter of 0.197" (5mm) to 0.201 (5.1mm) with a case thickness of
0.039" (1.0mm) to .091" (2.3mm).
Will fit a 3/16" hole.
Bottom of foot is 0.71" (18mm) diameter.
Top of foot is 0.79" (20mm).
Foot material is Thermoplastic Rubber, RMS-76
Screw material is Acetal, RMS-14